Cytron MDD10A 5-30V 10A Dual Channel DC Motor Driver
SKU: TH0694
In Stock₹2,035.50
₹1,725.00 (Ex. of GST)
SKU: TH0696
Cytron MDDRC10 is a plug-and-play dual-channel brushed DC motor driver designed for RC vehicles and mobile robots. It accepts RC receiver input directly, so you can control two motors without coding or additional signal conversion hardware.
With support for mixed mode and independent mode, the board is well suited for differential-drive robots, RC lawn mowers, combat robots, sumo robots, and other custom RC builds. In mixed mode, one channel handles throttle while the other handles steering; in independent mode, each RC channel controls one motor separately.
The driver operates from 7V to 30V DC and delivers up to 10A continuous per channel, with onboard protections for overcurrent, temperature, and undervoltage. A built-in 5V switching regulator can power the RC receiver up to 500mA. Important: the power input has no reverse-polarity protection, so reversing the battery connection can damage the board instantly.
Technical details for Cytron MDDRC10 7-30V 10A Dual Channel DC Motor Driver for RC.
| Specification | Details |
|---|---|
| Product Type | Dual-channel brushed DC motor driver for RC |
| Operating Voltage | 7V to 30V DC |
| Motor Current | 10A continuous per channel |
| Peak Motor Current | 30A per channel (current-limited, temperature dependent) |
| Motor PWM Frequency | 20kHz |
| RC Input Voltage | Low: 0 to 0.7V, High: 1.5 to 15V |
| RC Signal Frequency | 10Hz to 100Hz |
| RC Signal Timing | Deadband: ±35us, Fullscale: ±435us |
| 5V Output | 5V switching regulator, 500mA max for RC receiver |
| Protection Features | Overcurrent with active current limiting, temperature protection, undervoltage shutdown |
| Pin | Type | Description |
|---|---|---|
| VB+ | Power Input | Positive battery input terminal. |
| VB- | Power Input | Negative battery input terminal. |
| M1 | Motor Output | Motor channel 1 output terminal for brushed DC motor connection. |
| M2 | Motor Output | Motor channel 2 output terminal for brushed DC motor connection. |
| RC1 | RC Signal Input | RC channel 1 signal input; left motor in independent mode or throttle in mixed mode. |
| RC2 | RC Signal Input | RC channel 2 signal input; right motor in independent mode or steering in mixed mode. |
| +5V | Power Output | 5V output to power the RC receiver, up to 500mA max. Not intended to power servo motors. |
| GND | Ground | Ground reference for RC receiver connection. |
| Mode Switch | Configuration | Selects RC input mode between Independent Mode and Mixed Mode. |
| Test Buttons | User Input | Onboard buttons for quick motor driver testing; runs motor at full speed in forward or reverse depending on button used. |
Average rating
Based on 0 reviews
No reviews match this filter yet.
SKU: TH0694
In StockSKU: TH0698
In StockSKU: TH0699
Sold Out